Log In | Register
Skip to main content
Topic: Need new escape hatch (Read 4 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.
Need new escape hatch
Yahoo Message Number: 55988
Has anyone ever replaced an escape hatch cover and screen on their LD? I knew my 87 Hiccup was going to need a new plastic cover, but a vicious wind recently caught it and sent it blank-over teakettle and snapped the plastic hood completely off the piano hinge and the rivets holding the screen to the frame. Is it a specific manufactured-by-LD part, or is it a universal type design? I have temporarily duct taped it together so I can drive down the road, but with the rivets removed from their original spots, have a devil of a time closing it, and it's my only access to the roof, which I was hoping to recoat soon. Appreciate any suggestions.....
--Vicki, camphosting in the Oregon Umpquas at Rice Hill RV Park

Re: Need new escape hatch
Reply #1
Yahoo Message Number: 55989
Quote
the rivets holding the screen to the frame. Is it a specific manufactured-by-LD part, or is it a universal type design? I have
On our '83, I found an exact replacement hatch lid at CW, but our screen was ok. Do you think your screen can be repaired? Else, you might have to order the whole hatch.

Steve
2004 FL
2013 Honda Fit

Re: Need new escape hatch
Reply #2
Yahoo Message Number: 56002
I replaced the plastic hatch lid on my 84 LD recently. A local independent RV shop ordered it for me, only took a couple of days.
Should be a fairly standard piece.

Re: Need new escape hatch
Reply #3
Yahoo Message Number: 56019
Vicky, Bet you can fix it yourself.  I replaced the hatch cover on our 04, and it wasn't that hard.  At least it didn't require any "manly" strength.
Judy, Elsie 23.5 '04