LD Factory supplied Touch Up Paint June 15, 2023, 11:38:00 am I'm touching up a medium size area of Light Green paint. I had planned on using SprayMax custom per order spray cans; however, the light green paint did not match. Close but not dark enough. My plan was to use the same SprayMax paint cans through the entire process: Prime, Base Coat, followed by 2K Clear Coat to get a more professional DYI paint job. I know the paint is nasty and that a higher end masking is required. I know etching primer is used on raw aluminum.I found some older Lazy Daze supplied light green with activator. So now I go back to my original plan to use this older bottle of Lazy Daze Factory supplied Light Green Paint. I'd build up the base coat with a few coats of green. And still use the SprayMax Primer and 2K Clear coats. QUESTION: The green touch-up paint although several years old looks good. The supplied activator is hard as a rock. What is a proper activator to use that I could purchase locally. It's my understanding LD Paint is aircraft type two-part polyurethane enamel. I'm hoping I could use Eastwood Medium Speed Activator for Single Stage Paints 32 oz 70 to 80 Degrees F? But not sure this would work?. Any advise would be appreciated!
Re: LD Factory supplied Touch Up Paint Reply #1 – June 15, 2023, 12:30:46 pm Part of this post might help you. LD Touch Up PaintThe main supplier can help find a local store, which was my experience. 2 Likes