Re: Kwikee Jacks Reply #25 – October 27, 2022, 01:29:21 pm Hi again, Ron.Thanks for following up. I just wanted to make certain that I was on the same level as you were. In the meantime, I did some research and found out that both the solenoids as well as the valves are still available through Amazon. Both are/or were manufactured by Deltrol Hydraulics. Neither one is very expensive. My last project before our Lazy Daze leaves our family.Aad 1 Likes
Re: Kwikee Jacks Reply #26 – October 28, 2022, 01:45:48 am Hi Aad; a little trouble shooting can often save a lot of money and trouble. Have you measured the continuity of the suspected bad solenoid? And is there 12v dc. present at the wire going to the solenoid involved, and a good ground at the other end of the solenoid? My suspicion is still rodent damage to a wiring harness, or connection issues at interfaces. And of course opens inside of solenoids can happen. RonB
Re: Kwikee Jacks Reply #27 – November 02, 2022, 12:22:51 pm Hello All, I had Mitch @ 1113 W Foothill Blvd, Azusa, CA 91702 fix my Level Best Jack. The work on the Jack was performed at a shop in Fontana but Mitch installed… Everything seems to be working (626) 388-6666The cost was expensive but it had to be fixed. 1 Likes
Re: Kwikee Jacks Reply #28 – November 02, 2022, 09:44:43 pm Hello, I replied to the group about my Jack repair…I must have committed a foul… Anyway, I am thrilled! The Level Best are 💯! 1 Likes
Re: Kwikee Jacks Reply #29 – November 03, 2022, 02:57:29 am Hi Chris; Foul? Not many people have jacks, and maybe you didn't get any responses? I'm interested in what the repairs involved. Maybe you could PM me about the costs and necessary repairs. My jacks, valves and pump are fine, it's the electronics underneath that have not functioned for years (water intrusion). The lack of parts is the issue. RonB
Re: Kwikee Jacks Reply #30 – November 12, 2022, 08:38:26 pm Ron, I thought my foul was adding a phone number or possibly not following the rules of the web site. I paid approximately $1,900 to remove, repair and reinstall… I am satisfied thus far. Talk soon, Chris
Topic: Kwikee Jacks (Read 810 times)
previous topic - next topic
Topic: Kwikee Jacks (Read 810 times)
previous topic - next topic