Re: How to repair rust bubbles Reply #50 – March 05, 2022, 12:19:24 pm Mark … I’d suggest you call the Factory for guidance. I’ve found them to be quite helpful.
Re: How to repair rust bubbles Reply #51 – March 05, 2022, 12:31:42 pm Thank you.I called the factory regarding a rear window and frame install. They said they used Lock-tire and silicone.I may do a test strip before I commit to a larger section. .Mark
Re: How to repair rust bubbles Reply #52 – March 05, 2022, 12:35:51 pm "Lock-tire and silicone."---Loctite (polyurethane sealant) OK, but silicone? For sealing what specifically did they say the silicone was used?
Re: How to repair rust bubbles Reply #53 – March 05, 2022, 01:52:40 pm Silicone is used in sealing the window. Lock-tite used to secure window frame to window opening.
Re: How to repair rust bubbles Reply #54 – March 05, 2022, 01:58:15 pm Additional photos.Photo 1: White caulk residue. Almost looks and feels like an acrylic tub and sink caulkPhoto 2: End cap gap and screw hole. I removed the screw. I will fill this hole then drill and install screws above and below this hole.Photo 3: End cap gap after removing old caulk.
Re: How to repair rust bubbles Reply #55 – March 05, 2022, 04:08:57 pm Looking at a magnified view of Pic #1 I'd have to say it's not silicone and that whatever type of caulk it was, was applied too thinly to seal much of anything. It's not even adhering well to the fiberglass.
Re: How to repair rust bubbles Reply #56 – March 05, 2022, 09:35:14 pm The Factory does not uses silicone to glue anything .They maybe using a polyurethane sold by Locktite.I know of no easy way to determine what type of sealant was used. Common solvents do not dissolve silicone or polyurethane. Paint does not stick well to either.Larry
Re: How to repair rust bubbles Reply #57 – April 17, 2022, 06:06:39 pm For Larry.Due to crappy rainy weather I've not been able to calk my end caps.I purchase 5200 Fast Cure. You stated the tape needs to be removed immediately after applying the calk.No wait time??? Thanks!Mark
Re: How to repair rust bubbles Reply #58 – April 17, 2022, 08:48:25 pm Quote from: NADAZE! - April 17, 2022, 06:06:39 pmI purchase 5200 Fast Cure. You stated the tape needs to be removed immediately after applying the calk.No wait time??? The 5200 Fast Cure skims over very quickly, wait too long and the tape tears at the edges of the sealant.Larry
Re: How to repair rust bubbles Reply #59 – April 17, 2022, 09:05:09 pm So as soon as I have the caulk applied remove the tape?M
Re: How to repair rust bubbles Reply #60 – April 17, 2022, 09:28:25 pm Quote from: NADAZE! - April 17, 2022, 09:05:09 pmSo as soon as I have the caulk applied remove the tape?Push the sealant into the seam and smooth it out, using a gloved wet finger. When it looks good, pull the tape. Larry
Re: How to repair rust bubbles Reply #61 – April 17, 2022, 09:40:17 pm Thanks Larry.I hope to finish this project if it ever stops raining.Mark
Re: How to repair rust bubbles Reply #62 – April 17, 2022, 09:57:04 pm Quote from: NADAZE! - April 17, 2022, 09:40:17 pmI hope to finish this project if it ever stops raining.Send some of it south.Larry
Topic: How to repair rust bubbles (Read 1228 times)
previous topic - next topic
Topic: How to repair rust bubbles (Read 1228 times)
previous topic - next topic