Log In | Register
Skip to main content
Topic: Need advice on reapplying Eternabond (Read 174 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.
Need advice on reapplying Eternabond
In looking at my roof I noticed that parts of the Eternabond tape that is on there now is curling up at the edges. Does one remove and retape? If so, what is the best way-does it just peel off? Or should I layer on more Eternabond over the old, making sure to cover the part that is curling up? Advice appreciated.

2006 RB
 
Re: Need advice on reapplying Eternabond
Reply #1 –
Quote from: Cebuano54  - 
In looking at my roof I noticed that parts of the Eternabond tape that is on there now is curling up at the edges. Does one remove and retape? If so, what is the best way-does it just peel off? Or should I layer on more Eternabond over the old, making sure to cover the part that is curling up? Advice appreciated

Is the tape itself lifting or just the white, plastic coating on top?
If the plastic top is lifting I would clean the are area well and apply a small bead of either Dicor or polyurethane sealant to the lifting edges and press it down to secure it to the roof. Wear disposable gloves while doing this

If the tape is lifting, it could be serious and difficult to fix, post a few photos of what you see.

Larry
Larry
2003 23.5' Front Lounge, since new.  Previously 1983 22' Front Lounge.
Tow vehicles  2020 Jeep Wrangler Rubicon, 2001 Jeep Cherokee
Photo Collection: Lazy Daze