Log In | Register
Skip to main content
Topic: air conditioner shroud replacement (Read 266 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.
air conditioner shroud replacement
My 2000 MB is equipped with the original duo therm air conditioner.

Wanting to do some maintenance/cleaning  on the coils to improve its efficiency.

Does anyone know how to locate the model number?

I would like to order a replacement shroud and filters for it prior to doing the maintenance.
 
Thank you for your time, Kimberley from Kansas
2000 Mid Bath
Re: air conditioner shroud replacement
Reply #1 –

I replaced the AC shroud on my 2003 with this one five years ago:

Amazon.com: ICON Penguin Dometic Duo Therm Air Conditioner Shroud, Polar...

The model number of the Penguin 600 Series AC in my 2003 is 600315.321; it's a 13500 BTU  model.  I am not sure if the AC on a 2000 and on a 2003 are the same units, so if you don't have the pamphlet in the owner's packet, I'd verify the model number with another owner of a 2000 before ordering the shroud. If the model numbers are the same, the shroud in the above link is a good choice!

As an Amazon Associate Lazy Daze Owners' Group earns from qualifying purchases.
2003 TK has a new home
Re: air conditioner shroud replacement
Reply #2 –
Consider using spray primer/paint on your new shroud to protect it from UV rays.  Unprotected shrouds and bent covers have been known to crumble from UV exposure - you can search the forum for details.
Jane
Jane & Scott
Currently have a 1989 TK  LD we did a lot of upgrades on.
Bigfoot 25RQ Twin on order with early summer 2024 ETA

Our smartphone autocorrects into very poor English.
 We disclaim the illusion of ignorance this creates as we have enough ignorance we rightly claim.
 
Re: air conditioner shroud replacement
Reply #3 –
I was washing the roof on our 2010 RB when the water hose pulled against the rear corner of the A/C Shroud.  It literally cracked in half!

If you are still looking for the A/C shroud, there are several vendors around.

etrailer.com, Camping World come to mind.  Cost  for mine was $160.00 out the door at Camp Out, Inc in Las Vegas. 

I probably paid a premium of $40.00 dollars because the one I purchased was ultimately destined for another customer who said he would wait.

Remember that the general supply chain of parts have been growing thin with C-19, with many manufacturers short of workers.  As a result parts and services will be more expensive, perhaps as much as 30% or more. 

Yes, you will need the model # of your unit, which I was NOT able to find on the unit topside.  If you phone Dometic direct I am told that they will be able to provide your model # after asking you a few questions.

I took a chance and purchased one that looked very much the same (with the condition that I could return it) that fit my  Dometic Penguin Duo-Therm.   It was the exact fit.

Spraying the Shroud with a good coat of paint before installing is excellent advise as given by experienced Members above.

Good luck, and happy travels,

Most Respectfully,

Tony R (aka codefour)


Tony R
2010 LD RB - Sold to another happy LD Family