Dinosaur ignitor board for Suburban Furnace May 13, 2020, 06:27:15 pm I need to order an ignitor board for my furnace. Original ignitor board # is 230587. Dinosaur online at Amz says its corresponding replacement board is U IBL. I want to make sure this is correct. Has anyone ordered a new ignitor board for their Suburban furnace?Chris
Re: Dinosaur ignitor board for Suburban Furnace Reply #1 – May 13, 2020, 07:50:53 pm I don't know about the furnace, just refrigerator but make sure:1) The connectors are correct - straight/L shapped/etc. Check how many wires and where they connect to - some have 2 wires, some 1 wire.2) You might want a new box cover also - dinosaur ones are see thru which is nice because they have diagnostic lights on the boards - so you can check status without taking things apart - at least for the fridge).Jane
Re: Dinosaur ignitor board for Suburban Furnace Reply #2 – May 13, 2020, 08:34:16 pm Quote from: Jane and Scott - May 13, 2020, 07:50:53 pmI don't know about the furnace, just refrigerator but make sure:1) The connectors are correct - straight/L shapped/etc. Check how many wires and where they connect to - some have 2 wires, some 1 wire.2) You might want a new box cover also - dinosaur ones are see thru which is nice because they have diagnostic lights on the boards - so you can check status without taking things apart - at least for the fridge).JaneThanks, Jane. The board is accessed from the outside and is tucked back in beside the furnace sideways. You can't see the face without removing it and the wiring harness from the cavity. It's easy to get out and replace.Chris