Pd4600 boost mode March 24, 2018, 03:23:06 pm Quote from: Older_Fossil - August 26, 2014, 12:52:23 pmBOOST MODE: If the INTELI-POWER MARINE converter/charger senses the battery voltage has dropped below a preset level, the system automatically switches into the Boost Mode. In this mode the charge voltage is increased to 14.4 volts for a period of approximately 4 hours. Art[/i]Is there any consensus that the pd4600 rv units behave this way (boost for 4 hours)? I just finished installing my 4655, and after putting a big load on it, I watched it go from normal to boost, but it seems like its been several hours that it remains there after 100 % on the battery. The pd4600 manual seems to suggest it would select the new appropriate stage "whenever" the battery changed state...
Re: Pd4600 boost mode Reply #1 – March 25, 2018, 08:10:03 pm The boost mode continues until the charge current drops below a certain level, usually about 1A. I assume for this test that you do not have solar - or have its fuse pulled. If not, and you have a Heliotrope charge controller, it will override the converter, and is NOT a multi-stage charge controller.Steve
Re: Pd4600 boost mode Reply #2 – March 26, 2018, 12:03:31 pm I have solar, and threw a tarp over the panels. The controller is a 3000i. Doesn't the charge wizard just go off of battery soc? I'd think it would switch modes whether its charging or not. Though this was just my blind assumption...