kitchen vent broken March 19, 2018, 12:39:16 am Hello, I have a 2006, 26.5' rear kitchen. The non-powered vent in the kitchen blew up on the freeeway on my last trip. I've replaced vents and fans before but thought I would check with the forum if a standard 14-1/4 x 14-1/4 vent such as this one Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White... would fit? Thanks in advance.Bob
Re: kitchen vent broken Reply #1 – March 19, 2018, 03:24:16 am I recommend you opt for this instead, much sturdier construction and polycarbonate lid:Amazon.com: Fan-Tastic Vent 900 W/SMOKED LID Static Vent with Smoked Lid:...Steve 3 Likes As an Amazon Associate Lazy Daze Owners' Group earns from qualifying purchases.
Re: kitchen vent broken Reply #2 – March 19, 2018, 08:14:29 am Thanks Steve, That one does look sturdier.Bob
Re: kitchen vent broken Reply #3 – March 19, 2018, 11:19:13 am I also recommend you read posts, including the archives, about vent removal and installation. The old vent will come out a mangled mess - c'est la vie. - but careful removal of the LD-applied sealant will keep the roof intact and allow a good re-seal.Steve 1 Likes
Re: kitchen vent broken Reply #4 – March 19, 2018, 01:54:04 pm Quote from: Steve - March 19, 2018, 11:19:13 amI also recommend you read posts, including the archives, about vent removal and installation. The old vent will come out a mangled mess - c'est la vie. - but careful removal of the LD-applied sealant will keep the roof intact and allow a good re-seal.A oscilating tool, with a sharp chisel blade, will make the removal job a lot easier.Variable Speed Oscillating Multi-ToolLarry 2 Likes
Re: kitchen vent broken Reply #5 – March 20, 2018, 10:13:55 am Heat up the lap sealant with a heat gun and it will come off even easier. 1 Likes
Topic: kitchen vent broken (Read 233 times)
previous topic - next topic
Topic: kitchen vent broken (Read 233 times)
previous topic - next topic