Log In | Register
Skip to main content
Topic: Extend A Stay Valve Information (Read 29 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.
Extend A Stay Valve Information
Yahoo Message Number: 156093
Hi everyone, We just purchased an extend a stay kit for an external propane tank if needed for our 2000 RB from an online nationwide RV parts dealer.
We just received and the only thing I was concerned about was that the propane hose is only 5 feet. I looked up the manufacturer and it is MB Sturgis out of St. Louis.
I called and talked to the sales dept. and they sell and ship direct so you can order any length hose you need with the valve so you don't need to purchase a separate hose (as I did) and avoid the middleman.
Just thought I would pass along the information for anyone interested.
Paul and Jennifer
 
Re: Extend A Stay Valve Information
Reply #1 –
Yahoo Message Number: 156096
When you disconnect the extend-a-stay from the input to the regulator make sure to coil it up and secure well.
They don't last long when the hose falls out and rubs on the ground. I am not the only one that has done this, I have talked with several that have done it. I wonder if someone makes a recoil device that propane hose can coil in to protect it when not in use.

bobmoore14 Passport America Campgrounds

If your a Passport America member this place is a bargain. Just fill your water tank before you go.
The hot springs are very soothing, especially after a 2 hr. wait at the DMV.