Log In | Register
Skip to main content
Topic: knob on shower faucet not lifting completly (Read 5 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.
knob on shower faucet not lifting completly
Yahoo Message Number: 145025
the pull knob that converts the water to the shower when pulled up does not keep water from flowing from the faucet...We do get water to the shower but not as much..any suggestions how to correct this?
Re: knob on shower faucet not lifting completly
Reply #1 –
Yahoo Message Number: 145027
You like have a buildup of minerals in the shower head.  Try taking the shower head off the hose.  See if the flow is ok.  If yes try to back flush the the shower head. Youe have a buildup of minerals in the shower head.  There was a post a few weeks ago about a sink faucet having a similar issue.  Read through this thread: https://groups.yahoo.com/neo/groups/lifewithalazydazerv/conversations/topics/144837

Good luck,
John
Currently: 2008 36' Tiffin Open Road
Previously: 2007 Mid Bath
 
Re: knob on shower faucet not lifting completly
Reply #2 –
Yahoo Message Number: 145029
A good way to clean mineral deposits out of shower head is to soak it in a plastic container filled with vinegar, overnight usually does it.

Ian

From: "johndacrema@..." To: lifewithalazydazerv@yahoogroups.com Sent: Thursday, February 13, 2014 8:03 AM Subject: [LD] RE: knob on shower faucet not lifting completly
2015 MB