See level gauge panel placement 30' October 11, 2011, 12:01:58 pm Yahoo Message Number: 125907Calling all 30 footers with see level systems. Where did you place the control panel and why? I see two possible locations. 1 easier than another. Above the solar controller and into the padded side of kitchen cabinet Wondering what others have done.Lydia
Re: See level gauge panel placement 30' Reply #1 – October 11, 2011, 01:56:56 pm Yahoo Message Number: 125908Quote "Calling all 30 footers with see level systems. Where did you place the control panel and why?"Lydia Lydia Mike Sylvester installed mine one year at the Balloon Fiesta. I asked him to place the monitor panel just to the left of the LD monitor panel, in that small space to the right of the microwave. It's very unobtrusive there and quite handy. Mike ran the wires through a small pvc conduit in the corner to the left of the kitchen window, behind the sink.Hope that helps.Steve S. Lazy Bones & Jiggs
Re: See level gauge panel placement 30' Reply #2 – October 11, 2011, 06:39:13 pm Yahoo Message Number: 125930Ours is between the microwave and the range hood, fits perfectly and is easy to access.Kate, check out my blog at cholulared.blogspot.com
Re: See level gauge panel placement 30' Reply #3 – October 11, 2011, 06:51:12 pm Yahoo Message Number: 125934Thanks y'all! That is great news. I didn't think it was that small a panel. It would be immensely handy and accessible there. Lydia
Re: See level gauge panel placement 30' Reply #4 – October 12, 2011, 12:07:46 am Yahoo Message Number: 125946Tim Pease installed our See Level gauges before he left So. Cal. The readout panel is just below the solar control panel, and both of them are right around the corner from the freezer, so they're both to the left as you enter the coach.Pat Brunette 30' LD IB, Piscataqua River (currently parked beside the P. River in Eliot, Maine)
Re: See level gauge panel placement 30' Reply #5 – October 12, 2011, 08:50:10 pm Yahoo Message Number: 125968I don't have a 30 foot, but my SeeLevel II monitor panel is placed where I can see it through the open entry door. This is convenient for filling the fresh water tank; I can just look in and see how it's going. It's also useful when using a Flush King to flush the gray or black tank. I really don't want to overflow the tank, so it's nice to be able to see how full the tank is.SeeLevel II can support two monitor panels. I thought about having one inside and one out in one of the bays. I decided against it because of cost and complexity, but it's an attractive option.
Re: See level gauge panel placement 30' Reply #6 – October 13, 2011, 07:54:19 pm Yahoo Message Number: 125983What model do you have?Andrea
Re: See level gauge panel placement 30' Reply #7 – October 15, 2011, 10:17:07 pm Yahoo Message Number: 126024QuoteWhat model do you have? Rear Kitchen.