Inexpensive Utensil Drawer Insert Solution - 2007 RB (maybe others a April 15, 2010, 11:15:07 pm Yahoo Message Number: 111859I know this subject has been visited before but here is what works well for us in both of the small silverware/utensil drawers by the sink and the little drawer under the lavatory. For the kitchen drawers: Walmart "Mainstays" brand white plastic tray, Product Number 51-711 - 10.5 x 2.4 x 6.5 inches For the lavatory drawer: Walmart "Mainstays" brand white plastic tray, Product Number 33-711 - 4 x 2.4 x 6.5 inches They fit almost perfectly as-is with the molded lips of the tray riding on the factory drawer edges so no additional trim needs to be added to the drawer itself. If one of your drawers is especially tight, you can use scissors to remove a couple of very small extrusions at each corner of the tray. The tray lengths provide plenty of room to slide to the rear allowing access to the bottom of the drawer without removing the tray.GeorgeArby the Red/White RB Curvy the CR-V
Re: Inexpensive Utensil Drawer Insert Solution - 2007 RB (maybe othe Reply #1 – April 15, 2010, 11:31:56 pm Yahoo Message Number: 111861Forgot to add, about $2 for a pack of two.George