Log In | Register
Skip to main content
Topic: Level Best Kwikee System (Read 243 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.
Level Best Kwikee System
I have a Level Best Kwikee hydraulic leveling system. I think the control panel has failed on me. There was a popping sound and now no lights or any function. There seems to be power coming to the control as I can get a  12.5 volt reading on the red wire  coming into the 4-way connector.
Does anyone know if it is possible to get another control?
And is there a way to retract the two jacks that are down without risk of life threading injuries from high pressure hydraulic fluid?

Re: Level Best Kwikee System
Reply #1
Kwiikee left the hydraulic lift business many years ago, and finding parts is next to impossible. Many here have removed their old Kwikee systems and sold the parts to those needing them. It has been over ten years since I last saw a control box for sale.

A ram that does not retract can be lifted by loosening the hydraulic lines until fluid comes out, pushing the ram up, and then tying it up in position with wire or zip ties. Expect a bit of fluid to come out; have a drain pan handy to catch the fluid.
Ensure you are not in a position to get crushed when the ram retracts.

Larry
Larry
2003 23.5' Front Lounge, since new.  Previously 1983 22' Front Lounge.
Tow vehicles  2020 Jeep Wrangler Rubicon, 2001 Jeep Cherokee
Photo Collection: Lazy Daze

Re: Level Best Kwikee System
Reply #2
Hi  atallthinman;  and welcome to the Forum of all things Lazy Daze. Without the pump running, the only high pressure fluid, is that forced out by the weight of the motorhome as it tries to collapse the rams holding the motorhome up.  Not that high a pressure, and not all that dangerous. 
   The dangerous stuff is backhoe, bulldozer and thrill ride pressure cylinders. Sometimes there you can get nearly invisible leaks that you might get a hand in the way of.  I'm more concerned with high pressure 'airless' paint sprayers.
   It will be messy as you release pressure by undoing a fitting. Just crack it open. Push the ram into the folded up position and retighten the fitting.  Wire the jack in position, so it doesn't fall down into the roadway while you are traveling. You can put the fluid, if is clean, back in the reservoir. (or recycle it)   RonB
RonB (Bostick) living in San Diego
Original owner of "Bluebelle" a '99 TKB

Re: Level Best Kwikee System
Reply #3
Thank you Larry and RonB for your replies. I may have to do that to the hydraulic lines to get the jacks up. I just learned that there should be a bypass wire assembly attached to the wiring harness about 12” behind the control panel (but mine is missing) that would retract the jacks in case of control failure. At least it seems that was on Winnebago level best systems. Wish I had that.

Re: Level Best Kwikee System
Reply #4
So, one other question. It looks like there is a hydraulic line at top and the bottom of the jack cylinder. Does it matter which one is loosened?

Re: Level Best Kwikee System
Reply #5
So, one other question. It looks like there is a hydraulic line at top and the bottom of the jack cylinder. Does it matter which one is loosened?

One upper line supplies pressure to extend the jack, the lower line is used to retract the ram.
Loosen both lines and then push the ram up. It is a simple but dirty way of retracting the ram, have done it several times.

If you still want hydraulic levelers, remove the old system and install a new HWH or Bigfoot system. Both companies have been around for years and should have repair parts for the foreseeable future.
Kwikee systems had all sorts of issues and many of the parts were unique to their systems, you may be able to sell the usable parts, many here have done that.

For our usage, leveling ramps and Linx blocks work well.
https://www.amazon.com/Tri-Lynx-00015-Lynx-Levelers-Pack/dp/B0028PJ10K/ref=asc_df_B0028PJ10K?tag=bingshoppinga-20&linkCode=df0&hvadid=80745437134438&hvnetw=o&hvqmt=e&hvbmt=be&hvdev=c&hvlocint=&hvlocphy=&hvtargid=pla-4584345029089694&psc=1



Larry
As an Amazon Associate Lazy Daze Owners' Group earns from qualifying purchases.
Larry
2003 23.5' Front Lounge, since new.  Previously 1983 22' Front Lounge.
Tow vehicles  2020 Jeep Wrangler Rubicon, 2001 Jeep Cherokee
Photo Collection: Lazy Daze

Re: Level Best Kwikee System
Reply #6
"I just learned that there should be a bypass wire assembly attached to the wiring harness about 12” behind the control panel (but mine is missing) that would retract the jacks in case of control failure."

Yes, there was a "by-pass" assembly provided with the Kwikee System and I have one! I've also never had to use it!

But, if your control panel is still functional, there is a re-set routine that might save your bacon, it's saved mine on numerous occasions. Here's how, remove the panel from where it's mounted and disconnect the right hand wire connecter. Wait 10-15 seconds, reconnect and check to see if it works! Wishing you luck.   ;) 
Steve S.
Lazy Bones & Cedar
2004 30'IB (Island Bed)
Yesterday is History, Tomorrow is a Mystery
Live for the day!

Re: Level Best Kwikee System
Reply #7
The control does not work. I tried the reset several times.