Log In | Register
Skip to main content
Topic: RB SmartWeigh results (Read 552 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.
Re: RB SmartWeigh results
Reply #25
Heat in the summer here in texas causes more failures especially on inside rear. I think im going to bump it up to 65 front , 78 rear. (maybe 80 on the inside rear)

As others have mentioned, the Michelin RV Tire Guide states dual tires should be at the same pressure.  Look at page 5.  Lots of other good info in there as well:

https://www.michelinb2b.com/wps/b2bcontent/PDF/RV_Tires_Brochure.pdf
Greg & Victoria
2017 Mid-Bath  “Nocona” towing a manual 2015 Forester
Previously a 1985 TK
SKP #61264

 
Re: RB SmartWeigh results
Reply #26
Not sure this works but it would seem that the tire pressure at max weight is a known ratio. It is they are printed on the tire. The weight of the axel and even the corner is known.  Put the psi numbers on top, weight on the bottom and solve for “X”.

 But  I would trust the LD manual more. 
Currently: 2008 36' Tiffin Open Road
Previously: 2007 Mid Bath