Loctite PL S40 - A New Label December 28, 2020, 11:26:14 am As many know, the Factory favors Loctite PL S40 as one of their sealants. According to Loctite customer service, that product has a new label but is exactly the same as PL S40. This is a picture of the new label sealant. Hope this is helpful.
Re: Loctite PL S40 - A New Label Reply #1 – December 28, 2020, 11:45:31 am And you would use this instead of the 5200 FC? Cheers!Tony R. (aka codefour)
Re: Loctite PL S40 - A New Label Reply #2 – December 28, 2020, 11:55:58 am And you would use this instead of the 5200 FC?----For which applications?
Re: Loctite PL S40 - A New Label Reply #3 – December 28, 2020, 12:08:14 pm Quote from: codefour - December 28, 2020, 11:45:31 amAnd you would use this instead of the 5200 FC? I merely thought this information might be helpful to the Neighborhood.
Re: Loctite PL S40 - A New Label Reply #4 – December 28, 2020, 12:12:55 pm Quote from: codefour - December 28, 2020, 11:45:31 amAnd you would use this instead of the 5200 FC? If you want something to be hard to remove instead of nearly impossible!Rich 1 Likes
Re: Loctite PL S40 - A New Label Reply #5 – December 28, 2020, 12:13:13 pm Joan, perhaps perimeter window applications. End Cap cracks?I have always used 3M 5200 FC. Do you think this Loctite product is equal in end result and application?Cheers!Tony R. (aka codefour)
Re: Loctite PL S40 - A New Label Reply #6 – December 28, 2020, 02:16:27 pm "I merely thought this information might be helpful to the Neighborhood."---It is helpful; I've looked right past several items whose marketing departments thought needed label changes!I think that the Loctite is what the factory uses for some applications, but I don't know specifically which. There are two other widely-used polyurethane sealants, OSI Quad and Dap; it may be worth checking the specs on each to compare all three products.https://www.ositough.com/content/dam/uac/osi/master/PDFs/TDS/quad_tds.pdfPOLYURETHANE Construction SealantI've used 5200 Fast Cure for all end cap and window frame sealing jobs; I used Dicor non-leveling lap sealant on the roof "stanchions" for the ladder and rail.https://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-Marine-Adhesive-Sealant-5200-Fast-Cure/?N=5002385+3293241048&rt=rudNon-Leveling Lap Sealants | Dicor ProductsThe 5200 has held up well; it does discolor (around the window frames), but it does not deteriorate, separate, or "gap" from the motion of the rig. (The stuff can be a PITA to deal with, but the other sealants aren't far behind in this respect!)As with many things, YMMV. 2 Likes
Re: Loctite PL S40 - A New Label Reply #7 – December 28, 2020, 03:09:03 pm 3M 5200 Fast Cure, has been my favorite polyurethane sealant since discovering it 30-years. At work, I had an underwater, 480-VAC junction box that refused to stay watertight, causing all sorts of problems.Perusing West Marine's catalogue, I found the 3M products to be very highly recommended and gave the 5200 a try and have never looked back. Failures have been extremely rare, it's superior to every other product tried before and since.It's downside (and its upside), it sticks like crazy. It is messy to work with, wear disposable gloves and old clothes when using.The 5200 doesn't breakdown and shrink the way cheaper sealants, I give it a five-star rating. Larry 4 Likes
Re: Loctite PL S40 - A New Label Reply #8 – December 28, 2020, 05:03:10 pm "it sticks like crazy. It is messy to work with, wear disposable gloves and old clothes when using."And the same goes for PL S40. I've been using it to caulk a refrigerator compartment, and just like 5200, it gets everywhere and is a pain to clean up. (It also stays tacky for days.)One other thing: DO NOT let your cat walk through one of these sealants! Cleaning up after that is a nightmare. 5 Likes
Re: Loctite PL S40 - A New Label Reply #9 – December 28, 2020, 06:30:52 pm Andy, what was the cat’s opinion of the clean up?Randy 2 Likes
Topic: Loctite PL S40 - A New Label (Read 335 times)
previous topic - next topic
Topic: Loctite PL S40 - A New Label (Read 335 times)
previous topic - next topic