remove the itfluorescent light cover

Log in

Log In | Register

Skip to main content

Topic: remove the itfluorescent light cover (Read 247 times) previous topic - next topic

0 Members and 1 Guest are viewing this topic.

remove the itfluorescent light cover

June 18, 2020, 10:27:34 pm

How do you remove the fluorescent light cover on the florescent interior lights, I don't want to break it.

Thanks

   Liam~Karen
   98 ~ MB
   NinA

Re: remove the itfluorescent light cover

Reply #1 – June 18, 2020, 11:22:39 pm

If your hand is big enough, use your thumbs and (whichever) fingers to “pinch” each side of the cover about 3” or so from the ends. Wiggle the cover gently while squeezing it; the cover should come off. Be careful; old plastic, even though not exposed to directly to UV light, can get brittle as it ages.

Re: remove the itfluorescent light cover

Reply #2 – June 18, 2020, 11:42:25 pm

Thanks Joan, so easy and brittle.
Oh! Boy!
What a surprise, they are a recessed fixture,
what a hole it creates!

Karen~Liam
98 ~ MB
NinA

Re: remove the itfluorescent light cover

Reply #3 – June 19, 2020, 10:48:13 am

... and this is why most LED upgrades involve modifying the existing fixture!

Steve

Re: remove the itfluorescent light cover

Reply #4 – June 19, 2020, 11:02:18 am

We have a drum light we want to replace it with, did not know that I would have to trim it out. it will just take a little longer.

Karen~Liam
98 ~ MB
NinA

Re: remove the itfluorescent light cover

Reply #5 – June 19, 2020, 12:08:28 pm

Hi Karen and Liam. I'm always interested in lighting upgrades. I'm not sure what a 'Drum' light is? Any links to it? RonB

Re: remove the itfluorescent light cover

Reply #6 – June 19, 2020, 02:17:56 pm

I will include a photo when we are done and post it here on LDO. We changed out the ceiling Kitchen light with a 110v Saturn light we got from Amazon. We have been trying to find 12v lighting for son's tiniHouse. We have come up with a solution of installing 110v fixtures wired for 12v and use LED12v bulbs, they are out there but difficult to find.

Karen~Liam
98 ~ MB
NinA

Saturn Light fixture - HomeSelects 6102 Light, 12", Brushed Nickel - - Amazon.com

12v LED light bulbs - OPALRAY DC/AC 12V 4W LED Mini Globe Bulb, Dimmable with 12V DC Dimmer, E26...

As an Amazon Associate Lazy Daze Owners' Group earns from qualifying purchases.

Re: remove the itfluorescent light cover

Reply #7 – June 20, 2020, 01:56:57 am

I have that exact same style lights in my house kitchen, but I dumped the 13" Costco light because it was too yellow. I got the 10" and 14" natural white 4000K lights. Inside are non replaceable 110V multiple di chip LED's.
For the motorhome I find the M4 LED florescent tube simulators to be superior to fit in the standard fixtures. No woodworking needed. The conversion is really simple. For the main entry light in a MB I put in a 48 LED array from Blackhawk. I think I got the bright white. Wedge Base Rv Premium Quality 12/24 Volt White or Soft White
At 450 lumen, very bright. Good for the main light for the kitchen/dinette area, but maybe a little too bright for other areas. This isn't the 6000K hot blue white color. I find those to be too garish, hard on my eyes. Black hawk has a similar light at 300 lumens suitable for the cabover bunk lights, I've got 4, and bathroom in my TK. RonB

Re: remove the itfluorescent light cover

Reply #8 – June 20, 2020, 04:06:53 pm

It will be interesting to see if the 12-volt LED bulbs can handle the bumps and vibrations of rough roads, the LED elements look fragile and unsupported. Time will tell.

Larry

Affiliate Notice

LDOF is user-supported. When you purchase through some links on our site, we may earn an affiliate commission at no cost to you. As an Amazon Associate I earn from qualifying purchases.