Log In | Register
Skip to main content
Topic: Dinosaur ignitor board for Suburban Furnace (Read 95 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.
Dinosaur ignitor board for Suburban Furnace
I need to order an ignitor board for my furnace. Original ignitor board # is 230587. Dinosaur online at Amz says its corresponding replacement board is  U IBL. I want to make sure this is correct. Has anyone ordered a new ignitor board for their Suburban furnace?

Chris
Formerly: 2002 30' IB
Re: Dinosaur ignitor board for Suburban Furnace
Reply #1 –
I don't know about the furnace, just refrigerator but make sure:
1) The connectors are correct - straight/L shapped/etc.  Check how many wires and where they connect to - some have 2 wires, some 1 wire.
2) You might want a new box cover also - dinosaur ones are see thru which is nice because they have diagnostic lights on the boards - so you can check status without taking things apart - at least for the fridge).
Jane
Jane & Scott
Currently have a 1989 TK  LD we did a lot of upgrades on.
Bigfoot 25RQ Twin on order with early summer 2024 ETA

Our smartphone autocorrects into very poor English.
 We disclaim the illusion of ignorance this creates as we have enough ignorance we rightly claim.
 
Re: Dinosaur ignitor board for Suburban Furnace
Reply #2 –
Quote from: Jane and Scott  - 
I don't know about the furnace, just refrigerator but make sure:
1) The connectors are correct - straight/L shapped/etc.  Check how many wires and where they connect to - some have 2 wires, some 1 wire.
2) You might want a new box cover also - dinosaur ones are see thru which is nice because they have diagnostic lights on the boards - so you can check status without taking things apart - at least for the fridge).
Jane
Thanks, Jane. The board is accessed from the outside and is tucked back in beside the furnace sideways. You can't see the face without removing it and the wiring harness from the cavity. It's easy to get out and replace.

Chris
Formerly: 2002 30' IB