Log In | Register
Skip to main content
Topic: Covering holes in an interior wall (Read 292 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.
Covering holes in an interior wall
Our LD TK has  a couple holes in one of the white vinyl walls next to one of the couches. Not a big deal really. Looks like the previous owner just placed a couple screws  for a wall hanging. I first thought I would use the existing holes to hang something else but then I noticed the white colored brads or nail heads in the ceiling that I assume fasten the ceiling to rafters.

I'm wondering if there is something similar I could use to plug the holes in the wall. Maybe more likely I could find small round white vinyl stickers that would hide the holes and not draw much attention. Anything like that exist?
Steve
2003TK

Re: Covering holes in an interior wall
Reply #1
What I have done is use the rounded butt of a screwdriver to gently press/rub the holes until they are completely flush again and almost disappear, then use a good quality spackle. They will be nearly invisible.

Steve
2004 FL
2013 Honda Fit

Re: Covering holes in an interior wall
Reply #2

Steve (73),

The Mothership sent me a couple of screws with plastic caps to insert in the ceiling of our RB when I replaced a failed Smoke Alarm with a 3-in-1 ceiling alarm and no longer needed the existing holes from the failed alarm.

Amazon has several screw/caps similar to the ones I received from Lazy Daze. RV Designer H619 Dashboard Screw with Cap - Beige, Pack of 14 Amazon.com: RV Designer H619 Dashboard Screw with Cap - Beige, Pack of 14:...

They come in various sized screws and cap colors.

Or you could use one of these TOVOT 300 PCS Screw Cap Covers Self-Tapping Plastic for Phillips Screw -White/Beige/Red-Brown Amazon.com: TOVOT 300 PCS Screw Cap Covers Self-Tapping Plastic for Phillips...

A big box home repair center probably carries similar items.

Kent

As an Amazon Associate Lazy Daze Owners' Group earns from qualifying purchases.
2015 27' RB "MissB.Haven"

Re: Covering holes in an interior wall
Reply #3
I have seen Kent's suggestion used and if you don't mind the little bump of the cap, it looks "like it belongs".

If you decide use the spackle idea Steve suggested, FYI there are spackles that allow for some flex - easy to find at Home Depot by asking/reading labels.  I would use one of those, so when your RV is wiggling down the road (all those minor bumps and cracks) the spackle spot won't crack. 

Jane
Jane & Scott
Currently have a 1989 TK  LD we did a lot of upgrades on.
Bigfoot 25RQ Twin on order with early summer 2024 ETA

Our smartphone autocorrects into very poor English.
 We disclaim the illusion of ignorance this creates as we have enough ignorance we rightly claim.

Re: Covering holes in an interior wall
Reply #4
Do what Steve said and then visit your local craft store and find a matching paint, in a small bottle.
Matching paint is useful for all sorts of interior touch-ups.

Larry
Larry
2003 23.5' Front Lounge, since new.  Previously 1983 22' Front Lounge.
Tow vehicles  2020 Jeep Wrangler Rubicon, 2001 Jeep Cherokee
Photo Collection: Lazy Daze

 
Re: Covering holes in an interior wall
Reply #5
Nice solutions, thanks!
Steve
2003TK