Converting fluorescent to LED August 27, 2019, 05:02:10 pm On the overhead fluorescent, I am converting to LED bulbs. Does the blue wire plug into the red or white? It’s not clear for me
Re: Concerting fluorescent to led Reply #1 – August 27, 2019, 08:44:20 pm What blue wire? What LED "bulbs" are you using? People have taken several approaches to upgrade their fluorescent fixtures. The ballast for the fluorescent tubes is either disconnected or even removed and the LED lights connected to the 12V circuit coming into the fixture. It is not clear where the switch for the light is in your rig (in our LD it was part of the light fixture).Art
Re: Concerting fluorescent to led Reply #2 – August 27, 2019, 08:59:58 pm Unsure on your switch location too but the red and blue on one end of the fixture go to the white wire and the red and blue on the other end go to the switched wire. remove all wires from the ballast they are usually pop riveted to the fixture so just leave the ballast where it is
Topic: Converting fluorescent to LED (Read 149 times)
previous topic - next topic
Topic: Converting fluorescent to LED (Read 149 times)
previous topic - next topic