Log In | Register
Skip to main content
Topic: Kwikee 2000 Series Levelers Again. (Read 140 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.
Kwikee 2000 Series Levelers Again.
Ever since my pump motor rebuilding my system has been working great. However, some time ago, while driving, the alarm at the left bottom of the control panel would flash occasionally. To avoid this I installed a switch between the ignition wire and the control panel. Recently, after driving some distance the system would not activate. After parking for half and hour, It would again operate normally. I have checked all connections but I could not find any loose ones. Anybody has a similar experience with Kwikee levelers.

Aad Rommelse
2001 MB
 
Re: Kwikee 2000 Series Levelers Again.
Reply #1 –
"Anybody has a similar experience with Kwikee levelers."

I have the Kwikees but no symptom like yours. On the rare occasion when one or more of the rams would not retract I have removed the mounting screws (4) for the key pad, disconnected the main cable for a few seconds, reconnected the cable and everything returns to normal. I learned this from a Kwikee Tech before they went under, he said this effectively 'resets' the control board.   ;)
Steve S.
Lazy Bones & Cedar
2004 30'IB (Island Bed)
Yesterday is History, Tomorrow is a Mystery
Live for the day!