Log In | Register
Skip to main content
Topic: City water dust cover replacement (Read 12 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.
City water dust cover replacement
Yahoo Message Number: 148203
The soft plastic or ruber dust cover that came with our o7 mid bath is about shot. It still covers and held on for the round about trip fm VA to FL and back but the ring the holds it to the RV is shot.    I tried my local RV store but they did not have a replacement. I also looked on the camping world web site with no joy.  Perhaps I am using the wrong name.   When talking to RV stores or looking on line what name do I use for the part?  If all else fails I'm sure I can go to the hardware store and figure out a PVC solution but if someone has figured a do it yourself solution I would welcome direction.   John DaCrema 07 mid bath
Currently: 2008 36' Tiffin Open Road
Previously: 2007 Mid Bath
Re: City water dust cover replacement
Reply #1 –
Yahoo Message Number: 148206
John, I think you'll find what you're looking for--a four-prong eyelet and washer set--at the Tarp & Cover Superstore, among other places.

However, when the time comes to replace your factory-supplied cover, you may want to consider a mesh cover from a company such as Sunpro. Many of us have discarded opaque covers in favor of mesh covers, because the latter block up to 90% of heat but still admit plenty of light, making the front of one's coach much brighter and more cheerful.

They also provide complete privacy during the day, while still letting you see out the windshield--another big plus. It's definitely worth considering a mesh windshield cover as an alternative to the factory's dark and gloomy cover, in my opinion.

Andy Baird

Travels with Andy
Andy Baird
2021 Ford Ranger towing 2019 Airstream 19CB
Previously: 1985 LD Twin/King "Gertie"; 2003 LD Midbath "Skylark"
Re: City water dust cover replacement
Reply #3 –
Yahoo Message Number: 148210
http://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=city+water+fill+plug&_sacat=0

A lot of choices at the above link.
Tom

The  soft plastic or ruber dust cover that came with our o7 mid bath is about shot.  It still covers and held on for the round about trip fm VA to FL and back but  the ring the holds it to the RV is shot. I tried my local RV store but they did  not have a replacement. I also looked on the camping world web site with no joy.  Perhaps I am using the wrong name. When talking to RV stores or looking on line  what name do I use for the part? If all else fails I'm sure I can go to the  hardware store and figure out a PVC solution but if someone has figured a do it  yourself solution I would welcome direction. John DaCrema 07 mid bath
Re: City water dust cover replacement
Reply #4 –
Yahoo Message Number: 148211
OK, now I feel really dumb... I somehow failed to read the subject line and thought you were talking about the windshield cover, John. Hmmm... I wonder if there's a way I can blame this on Yahoo? Yes, that's it--I was confused by the way the Neo forum redesign rearranged everything. That'll be my excuse. ;-)

Well, I hope the information will be useful to somebody else. And thanks to Art for coming up with the right answer, after I offered the wrong one.

Andy Baird

Travels with Andy
Andy Baird
2021 Ford Ranger towing 2019 Airstream 19CB
Previously: 1985 LD Twin/King "Gertie"; 2003 LD Midbath "Skylark"
Re: City water dust cover replacement
Reply #5 –
Yahoo Message Number: 148212
Thanks. That's got it.  John
Currently: 2008 36' Tiffin Open Road
Previously: 2007 Mid Bath