no oven July 24, 2010, 07:18:31 pm Yahoo Message Number: 114695Stew and I have been fulltiming for a couple of months now and I just tried to start the oven for the second time (first time a month ago). It still won't ignite. Is there something I can check or maybe I'm doing something wrong. I am doing the same thing I've always done with ovens and that is to turn it on, wait a bit, and then get the flame to the proper thingie. The burners are working just fine. I hope someone can help or we'll just do without the oven until we move out of this rv park. Thanks guys.Judy Wms. Blue '07 RB "Dog Daze" White '09 Scion "Puppy Daze" And all the fur kids[Non-text portions of this message have been removed]
Re: no oven Reply #1 – July 24, 2010, 07:37:31 pm Yahoo Message Number: 114697Judy, Are you pushing in the knob for some 10 seconds after the flame ignites to get the thermostatic valve heated up? If not, it will just go off.Alex Rutchka, SE #4 '05 MB
Re: no oven Reply #2 – July 24, 2010, 11:47:03 pm Yahoo Message Number: 114705Quote Judy, "Are you pushing in the knob for some 10 seconds after the flame ignites to get the thermostatic valve heated up? If not, it will just go off."Alex Rutchka, SE #4 '05 MB Not necessarily true, Alex. Someone posted some years back that all you have to do is turn the oven on to a temp, say perhaps 350, and then light the ignitor light in the oven. Close the oven door and check in in a few minutes and you'll see the burner is going full blast. I got tired of holding the knob in and this works on our '02 30'. Chris
Re: no oven Reply #3 – July 25, 2010, 04:43:41 pm Yahoo Message Number: 114719Quote--- On Sat, 7/24/10, Judy Williams wrote:Stew and I have been fulltiming for a couple of months now and I just tried to start the oven for the second time (first time a month ago). It still won't ignite.Judy, You didn't mention whether the oven starts but doesn't remain running or if you can't get it to ignite at all. In our 06 MB, the marking on the gas control knob doesn't exactly match the indicated start position. I have to turn the knob slightly beyond the indicated position to get the gas to flow and the oven to ignite.BillWild Thing (06 MB)NE 59Caravan 2967[Non-text portions of this message have been removed]
Re: no oven Reply #4 – July 25, 2010, 07:52:36 pm Yahoo Message Number: 114723At 11:56 AM 7/25/2010, you wrote:QuoteYou didn't mention whether the oven starts but doesn't remain running or if you can't get it to ignite at all. In our 06 MB, the marking on the gas control knob doesn't exactly match the indicated start position. I have to turn the knob slightly beyond the indicated position to get the gas to flow and the oven to ignite. We have no trouble getting the oven to light up, but it doesn't stay lit after we close the oven door. After many fruitless attempts, we figured out that for whatever reason, not enough oxygen is getting inside to maintain a flame, so we bought a couple of flat, fairly thin magnets and stuck them on the oven door. They are just thick enough to keep the door open a small crack, and now the oven works perfectly.Just another possibility, admittedly not the usual suspect! :-)Sonsie
Re: no oven Reply #5 – July 27, 2010, 12:01:55 am Yahoo Message Number: 114770Thanks both Alex and Chris for your comments. I will give it another try as soon as I have something I want to bake again.Judy Wms. Blue '07 RB "Dog Daze" White '09 Scion "Puppy Daze" And all the fur kids[Non-text portions of this message have been removed]
Topic: no oven (Read 1 time)
previous topic - next topic
Topic: no oven (Read 1 time)
previous topic - next topic