Log In | Register
Skip to main content
Topic: Inexpensive Utensil Drawer Insert Solution - 2007 RB (maybe others a (Read 11 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.
Inexpensive Utensil Drawer Insert Solution - 2007 RB (maybe others a
Yahoo Message Number: 111859
I know this subject has been visited before but here is what works well for us in both of the small silverware/utensil drawers by the sink and the little drawer under the lavatory.
 For the kitchen drawers: Walmart "Mainstays" brand white plastic tray, Product Number 51-711 - 10.5 x 2.4 x 6.5 inches
 For the lavatory drawer: Walmart "Mainstays" brand white plastic tray, Product Number 33-711 - 4 x 2.4 x 6.5 inches
 They fit almost perfectly as-is with the molded lips of the tray riding on the factory drawer edges so no additional trim needs to be added to the drawer itself. If one of your drawers is especially tight, you can use scissors to remove a couple of very small extrusions at each corner of the tray.
 The tray lengths provide plenty of room to slide to the rear allowing access to the bottom of the drawer without removing the tray.

George

Arby the Red/White RB
Curvy the CR-V