Window shades February 22, 2008, 11:20:46 am Yahoo Message Number: 89716I mentioned in a previous post that I was interested in swapping out the OEM roll up shades in my 1995 mid bath and I believe Andy indicated someone else had done this. I ordered replacement shades (later model pleated type) from LD. No hardware was included. How do they mount. TIA
Re: Window shades Reply #1 – February 22, 2008, 12:15:02 pm Yahoo Message Number: 89721Hmmm, not sure, but this Links folder might help: Links > Improvements > Interior > Blinds, Curtains & Shades > Curtains and blinds for windowsTessa
Re: Window shades Reply #2 – February 22, 2008, 12:46:48 pm Yahoo Message Number: 89725"I ordered replacement shades (later model pleated type) from LD. No hardware was included. How do they mount." Mounting screws go straight up through the top frame of the shade into the underside of the cabinet above the window. Cords are pulled taut by clear plastic spools mounted at the lower corners of the window. (If the cords are not taut enough, the shades will slip down while you're traveling; if too taut, they will be difficult to raise and lower.)Andy Bairdhttp://www.andybaird.com/travels/
Re: Window shades Reply #3 – February 22, 2008, 12:55:30 pm Yahoo Message Number: 89726Thanks Andy. That's what I suspected, but just wanted to make sure.Dennis