Log In | Register
Skip to main content
Topic: oil cooler lines (Read 132 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.
oil cooler lines
1995 Chevy 7.4L - Does anyone have a part number for these lines?  Or, any idea where to purchase them?
Re: oil cooler lines
Reply #1 –
Quote from: aschofer  - 
1995 Chevy 7.4L - Does anyone have a part number for these lines?  Or, any idea where to purchase them?

With a nearly 30-year-old RV, new parts are not going to be available.  Your choices are to find them in an auto dismantling yard, fabricate a new set, or replace the hard lines with rubber oil lines, possibly mixed with sections of new hard line.
Occasionally, I see parts like this listed on eBay

Ah, the joys of owning an old RV
Larry
Larry
2003 23.5' Front Lounge, since new.  Previously 1983 22' Front Lounge.
Tow vehicles  2020 Jeep Wrangler Rubicon, 2001 Jeep Cherokee
Photo Collection: Lazy Daze
Re: oil cooler lines
Reply #2 –
Hi Aschofer;  Welcome to the LDOG group.  I hope you'll find what you need here.  The cooling lines in your picture appear to be in good shape, other than needing cleaning. Can I assume you've tried a Chevrolet dealer, NAPA, etc?
   I did find some parts at RockAuto   1995 GMC G3500 7.4L V8 Fluid Cooler Line Connector | RockAuto, along with o-rings    
   I guess I need to start replacing parts for my nearly 25 year old LD, or at least stock piling some harder to find parts for myself. It's hard to know what you'll need, until you need it.    RonB
RonB (Bostick) living in San Diego
Original owner of "Bluebelle" a '99 TKB
Re: oil cooler lines
Reply #3 –
Thanks Larry and RonB,

The lines are leaking oil up farther by the crimp where the rubber meets the metal.  I've searched everywhere and can't find a match.  Probably will have to have some made.

Andy
Re: oil cooler lines
Reply #4 –
Hi Andy; If you can afford some downtime I know people who have had custom power steering hoses made for them in major city areas.  Also hydraulic pressure hoses, so these cooling lines with relatively low pressures might be easy to have made.  The metal parts might be re-usable.   RonB
RonB (Bostick) living in San Diego
Original owner of "Bluebelle" a '99 TKB
Re: oil cooler lines
Reply #5 –
They appear to be engine oil cooler lines, I would bet they might be available through NAPA. Might find a good pair at a salvage yard. Or cut the crimp ring off, shorten the hose and install a hose clamp.

Jon
1994 MB