Log In | Register
Skip to main content
Topic: Front license plate step (Read 384 times) previous topic - next topic
0 Members and 5 Guests are viewing this topic.
Front license plate step
I'm looking for a front step that functions basically as a front license plate holder.
We had one on our 1995.

It would fold down and then turn into a step that you could stand on to reach higher.

Anyone have a link to these? I'm looking for one for our 2021.
2021 Mid Bath
Re: Front license plate step
Reply #1 –

Hi Ted;  You could mount a license plate on one of these folding steps:  Amazon.com: Carr 190001 Mega Step : Automotive    .  You'd need to drill holes in the bumper metal part.  On my rig's bumper, the plastic parts would get in the way. Your much newer bumper might be much different.  Ronb

As an Amazon Associate Lazy Daze Owners' Group earns from qualifying purchases.
RonB (Bostick) living in San Diego
Original owner of "Bluebelle" a '99 TKB
Re: Front license plate step
Reply #2 –
Quote from: RonB  - 
Hi Ted;  You could mount a license plate on one of these folding steps:  Amazon.com: Carr 190001 Mega Step : Automotive    .  You'd need to drill holes in the bumper metal part.  On my rig's bumper, the plastic parts would get in the way. Your much newer bumper might be much different.  Ronb
Thanks.
I'll probably settle for a folding step stool instead. I don't want to be drinking holes and there's probably no way around that.
As an Amazon Associate Lazy Daze Owners' Group earns from qualifying purchases.
2021 Mid Bath
 
Re: Front license plate step
Reply #3 –

I never found a folding step that looked right, still, I had the need to climb up higher for cleaning the windshield.
I placed 2" wide 3M Saftery Walk tape on the bottom of the radiator air intake opening, the tape provides an anti-slip step, I can now get to the center of the windshield for cleaning
3M Safety-Walk Slip Resistant Tread, Black, 2-in by 180-in Roll, 7635NA -...



Larry

As an Amazon Associate Lazy Daze Owners' Group earns from qualifying purchases.
Larry
2003 23.5' Front Lounge, since new.  Previously 1983 22' Front Lounge.
Tow vehicles  2020 Jeep Wrangler Rubicon, 2001 Jeep Cherokee
Photo Collection: Lazy Daze
Re: Front license plate step
Reply #4 –
Quote from: Larry W  - 
I never found a folding step that looked right, still, I had the need to climb up higher for cleaning the windshield.
I placed 2" wide 3M Saftery Walk tape on the bottom of the radiator air intake opening, the tape provides an anti-slip step, I can now get to the center of the windshield for cleaning
3M Safety-Walk Slip Resistant Tread, Black, 2-in by 180-in Roll, 7635NA -...



Larry
Good idea!
As an Amazon Associate Lazy Daze Owners' Group earns from qualifying purchases.
2021 Mid Bath
Re: Front license plate step
Reply #5 –
Quote from: Larry W  - 
I never found a folding step that looked right, still, I had the need to climb up higher for cleaning the windshield.
I placed 2" wide 3M Saftery Walk tape on the bottom of the radiator air intake opening, the tape provides an anti-slip step, I can now get to the center of the windshield for cleaning
3M Safety-Walk Slip Resistant Tread, Black, 2-in by 180-in Roll, 7635NA -...



Larry

I went out and measured and unfortunately my "step" is not wide enough less than half inch.
As an Amazon Associate Lazy Daze Owners' Group earns from qualifying purchases.
2021 Mid Bath
Re: Front license plate step
Reply #7 –
Quote from: Larry W  - 
I never found a folding step that looked right, still, I had the need to climb up higher for cleaning the windshield.
I placed 2" wide 3M Saftery Walk tape on the bottom of the radiator air intake opening, the tape provides an anti-slip step, I can now get to the center of the windshield for cleaning
3M Safety-Walk Slip Resistant Tread, Black, 2-in by 180-in Roll, 7635NA -...



Larry
I always wondered why there was this tape installed on my rig. Now I know!
As an Amazon Associate Lazy Daze Owners' Group earns from qualifying purchases.
2001 23.5 twin/king. Second owners, first time Lazy Dazer
Re: Front license plate step
Reply #9 –
 Go to Ragusa RV. They make an aluminum license plate step for the front bumper of a GMC. it’s $79 don’t know if it’s a good fit or not but it’s aluminum it’s nice
2002 MidBath