Log In | Register
Skip to main content
Topic: Odd fitting (Read 149 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.
Odd fitting
Driver's side rear bumper corner area.
Mid-Bath.

Anyone?

2021 Mid Bath

 
Re: Odd fitting
Reply #1
That is where the outside remote temperature sensor lives. You should be able to find it inside when the cap is removed.  Not sure why they designed it like that.

Good to see you getting underneath and into the weeds!  👍
Greg & Victoria
2017 Mid-Bath  “Nocona” towing a manual 2015 Forester
Previously a 1985 TK
SKP #61264

Re: Odd fitting
Reply #2
That is where the outside remote temperature sensor lives. You should be able to find it inside when the cap is removed.  Not sure why they designed it like that.


It lets in air to get the temperature, but keeps it mostly water tight.
Linda B
Green 2021 RB
2022 Ford Maverick toad

Re: Odd fitting
Reply #3
Unscrew the large PVC nut and there is a sending unit up inside the pipe. It resembles a tv remote. No buttons but a panel to slide open to insert new AA batteries.

One more annual maintenance project. 🤪

Kent
2015 27' RB "MissB.Haven"

Re: Odd fitting
Reply #4
The previous owner of my LD had purchased a new temperature station for the motorhome but the new outdoor sensor was slightly larger than original. I temporarily relocated it into the unused sewer hose storage compartment.  One of these days I’ll crawl underneath and drill the PVC fitting out a little larger to accommodate the sensor. Since the photo was taken, I’ve installed gasket material around the little door to help resist water intrusion.
Greg & Victoria
2017 Mid-Bath  “Nocona” towing a manual 2015 Forester
Previously a 1985 TK
SKP #61264

Re: Odd fitting
Reply #5
His a key location posing a a black tank something or other. 
Currently: 2008 36' Tiffin Open Road
Previously: 2007 Mid Bath