Flooring going in 2006 MB December 23, 2020, 02:12:04 pm Flooring going in today. It’s going to look pretty good when it’s all trimmed up. I’ll post completed pics later today if they finish it. Vinyl plank, from Lowes, “Jamestown Oak” is the color. 5 Likes
Re: Flooring going in 2006 MB Reply #1 – December 23, 2020, 02:14:54 pm Are you gluing this flooring down on the raw plywood, or is there an underlayment?Looks great!Tony R (aka codefour)
Re: Flooring going in 2006 MB Reply #2 – December 23, 2020, 03:16:53 pm The flooring has a built in underpayment and sound deadening layer, so no underlay. Flooring guys have done a bunch of RVs, they recommended no glue, just a good fit with a 1/8” gap around the perimeter. They will put in a 3/8” flexible trim around it when they finish, I’ll post pics when they’re finished. 4 Likes
Re: Flooring going in 2006 MB Reply #4 – December 23, 2020, 11:37:34 pm Quote from: Easy Victor - December 23, 2020, 11:32:33 pmFloors finished. Victor, that looks great. I searched Lowes for "Jamestown Oak" but couldn't find that specific color. Do you have a more specific link to it? I really like that color. What kind of an installation company did you use?Chris 1 Likes
Re: Flooring going in 2006 MB Reply #5 – December 23, 2020, 11:46:49 pm Quote from: Chris Horst - December 23, 2020, 11:37:34 pmVictor, that looks great. I searched Lowes for "Jamestown Oak" but couldn't find that specific color. Do you have a more specific link to it? I really like that color. What kind of an installation company did you use?Chris[/sizeI misspoke, the brand is ProCore Plus and the color is Jamestown hickory. I had a local tile guy that I’ve used before do it. There’s really no difference between a house and an RV. Materials $295. Labor $500. 2 Likes
Re: Flooring going in 2006 MB Reply #7 – December 24, 2020, 09:56:26 am Love the floors. Thank you for sharing.
Re: Flooring going in 2006 MB Reply #8 – December 24, 2020, 11:06:55 am Looks beautiful!!How long did installation take and did they remove old carpeting?
Re: Flooring going in 2006 MB Reply #9 – December 24, 2020, 01:05:29 pm Quote from: Lazy Bones 2 - December 24, 2020, 11:06:55 amLooks beautiful!!How long did installation take and did they remove old carpeting?I removed the carpet, it just pulled up pretty easily. Two guys, they pulled all the old staples and cut out the vinyl flooring, laid the new tile in about 4 1/2 hrs. 3 Likes
Re: Flooring going in 2006 MB Reply #10 – December 24, 2020, 06:16:31 pm Very good job, your rig looks really nice. I like the tile job you did around the sink. You should be proud.Randy 4 Likes
Re: Flooring going in 2006 MB Reply #11 – December 25, 2020, 10:37:35 am your floor came out awesome,was the vinyl flooring glued?
Re: Flooring going in 2006 MB Reply #12 – December 25, 2020, 11:14:51 am Quote from: Sullyboy61 - December 25, 2020, 10:37:35 amyour floor came out awesome,was the vinyl flooring glued?Scroll up to message #2.Chris
Re: Flooring going in 2006 MB Reply #13 – December 25, 2020, 07:28:32 pm Quote from: Chris Horst - December 25, 2020, 11:14:51 amScroll up to message #2.ChrisAsking about the previous floor
Re: Flooring going in 2006 MB Reply #14 – December 25, 2020, 08:26:15 pm Honestly I don’t know if the original vinyl was glued down or not, the flooring guys pulled it up. Sorry.
Re: Flooring going in 2006 MB Reply #15 – December 25, 2020, 10:20:16 pm When I removed the carpet and lino in my LD, the carpet was held down by numerous staples. The lino was thoroughly glued down and took a fair amount of time to remove with a 5 in 1. Luckily there wasnt a lot of lino to remove. I installed sheet lino, one piece from front to back of a 30 ft LD. It was glued down and I used caulking at the edges. At the time, my flooring installer recommended against the plank flooring due to the high temperatures in Arizona. 5 Likes
Re: Flooring going in 2006 MB Reply #16 – December 25, 2020, 11:58:15 pm Quote from: parussky - December 25, 2020, 10:20:16 pmWhen I removed the carpet and lino in my LD, the carpet was held down by numerous staples. The lino was thoroughly glued down and took a fair amount of time to remove with a 5 in 1. Luckily there wasnt a lot of lino to remove. I installed sheet lino, one piece from front to back of a 30 ft LD. It was glued down and I used caulking at the edges. At the time, my flooring installer recommended against the plank flooring due to the high temperatures in Arizona. Are you satisfied with the job? Anything you would do differently? Chris
Re: Flooring going in 2006 MB Reply #17 – December 26, 2020, 05:57:54 pm Chris,It seems that there are few jobs that I have done my LD that I wouldnt do differently in the future. And the replacement of the flooring is one of them. But this is partly due to some new materials that have come out in lvp flooring. At the time, I was going to use plank and glue it, which is not highly recommended, but can be done. But my installer said the amount of labor would be high and he preferred roll goods. I picked out a good grade of lino from my flooring supplier and away we went. It still seems remarkable that my installer could take a 12ft wide x 27ft long piece of lino and install it without one seam. But that is the case, an experienced installer with a sharp knife is a wonder to behold.In any case, I do have one seam and that is at the floor junction with the raised platform for the toilet. At the time that I put lino in the LD, I hadnt tackled the teardown and rebuild of the toilet. After I removed the toilet and did the rebuild (a disgusting job), I had my installer come back and put in the small amount of lino on the platform. I then covered the seam at the floor/platform with a piece of 1"x3" oak and built a ledge for my feet. If you have ever sat on the toilet in a 30ft LD, you will find that your feet do not reach the floor unless you are tall. This oak ledge solved that issue. The installer charged me $500 total for two visits and the lino was $1000. If I had used plank and did the install myself, the cost would have been much lower. That is probably what I would do in the future. 2 Likes
Re: Flooring going in 2006 MB Reply #18 – December 26, 2020, 09:09:05 pm "...you will find that your feet do not reach the floor ..."I solved that problem by cutting to shape a ¾" thick piece of plywood to raise the floor level and covered it with a small throw rug.