Log In | Register
Skip to main content
Topic: Painting Refrigerator Shelves (Read 359 times) previous topic - next topic
0 Members and 3 Guests are viewing this topic.
Painting Refrigerator Shelves
After 13 years the metal shelves in our refrigerator were not looking so good.
Coated them with Plasti Dip from Amazon
Don & Dorothy
Sold our LD in June of 2023

Our boring always non-PC travel blog
Traveling Dorothy

 
Re: Painting Refrigerator Shelves
Reply #1
Let us know how that holds up, Don.
Andy Baird
2021 Ford Ranger towing 2019 Airstream 19CB
Previously: 1985 LD Twin/King "Gertie"; 2003 LD Midbath "Skylark"


Re: Painting Refrigerator Shelves
Reply #3
Scott has used this for projects unrelated to RVs.  He says it does not survive rough handling (eg throw - toss the item into the car, dragging something over the top of it, etc. ).  However, use in a Fridge might be gentler and not have the same problems.
Jane
Jane & Scott
Currently have a 1989 TK  LD we did a lot of upgrades on.
Bigfoot 25RQ Twin on order with early summer 2024 ETA

Our smartphone autocorrects into very poor English.
 We disclaim the illusion of ignorance this creates as we have enough ignorance we rightly claim.

Re: Painting Refrigerator Shelves
Reply #4
Fridge use might be so rough in it.

Please rewrite so I can understand.
Don & Dorothy
Sold our LD in June of 2023

Our boring always non-PC travel blog
Traveling Dorothy

Re: Painting Refrigerator Shelves
Reply #5
Hi Don;  In my experience I had a shower caddy with white vinyl coated 'wires' that started rusting after a few years in small places. Rusty water would drip onto the plastic shower pan and was hard to clean.  The wire racks in my 21 yo TK refrigerator were developing small pieces of white material that would flake off. It seemed like an enamel or epoxy paint, maybe it was baked on. Instead of replacing it,  I just cleaned it with detergent and acetone, and oversprayed with handy dandy gloss white spray enamel. Home Depot Rustoleum. Several layers.  It covers and adheres well.  I put on many coats and I'm sure had lots of drips and runs, but it seems very 'tough'.  I think Jane was saying that the vinyl was too soft and would tear and peel off with rough handling.  Time will tell, as Joan says YMMV.  By the time my shelves are worn again I will probably have replaced my 21 year old refrigerator, which still works great (for now).     RonB
RonB (Bostick) living in San Diego
Original owner of "Bluebelle" a '99 TKB

Re: Painting Refrigerator Shelves
Reply #6
Fridge use might be so rough in it.

Please rewrite so I can understand.
Don - sorry I did that post on my phone.  I fixed it up.
Jane & Scott
Currently have a 1989 TK  LD we did a lot of upgrades on.
Bigfoot 25RQ Twin on order with early summer 2024 ETA

Our smartphone autocorrects into very poor English.
 We disclaim the illusion of ignorance this creates as we have enough ignorance we rightly claim.

Re: Painting Refrigerator Shelves
Reply #7
The longevity of Plasti Dip has been questioned. I have decided it will outlive me, so no worries. If I am still alive ask me again in a few years.

I thought I would share that the DW puts plastic sheets on the shelves. The sheets are to try to trap any liquids, but since they cover the shelves, they protect the paint on the shelves.

On another subject
When she removed the shelves, she also un-hooked the muffin fan I installed that keeps air circulating to prevent hot/cold spots in the refer. So I thought I would share with you how that can be done.
It is referenced in The Campanion but here is the direct link.

It's in two parts. 1) Installing muffin fans in the refer exhaust stack 2) Installing a muffin fan in the refer.
You can buy a battery-powered fan for the refer, but this describes how to power them off the refer itself.


Don & Dorothy
Sold our LD in June of 2023

Our boring always non-PC travel blog
Traveling Dorothy

Re: Painting Refrigerator Shelves
Reply #8
Don, I like the plastic sheet idea. 
We put things in plastic baggies often (if they are not in a sealed food container) as you never know when something will start leaking (that you never thought would leak).
Plastic baggies especially for freezer items keeps them from sticking to the freezer and makes it much easier to pull them out.
Do you all use the plastic sheet in the freezer?  How does that work if you do.

Jane
Jane & Scott
Currently have a 1989 TK  LD we did a lot of upgrades on.
Bigfoot 25RQ Twin on order with early summer 2024 ETA

Our smartphone autocorrects into very poor English.
 We disclaim the illusion of ignorance this creates as we have enough ignorance we rightly claim.