Log In | Register
Skip to main content
Topic: Water Leak (Read 116 times) previous topic - next topic
0 Members and 2 Guests are viewing this topic.
Water Leak
1989 M22 on Chevy G30 chassis.

I have a substantial water leak that looks like it involves the fresh water tank. Depending on the slope, it leaks alternately on the left or right side. Took a quick gander underneath but find there is aluminum cladding that I would have to remove before I could inspect.

Anyone out there ever encountered this? If so, what advice or tips and tricks are you able to share?
LD 22', 1989 Custom Build. Chassis 1990 Chevy Van G30, 5.7l.

 
Re: Water Leam
Reply #1
Start at  your fresh water tank and work your way out via the pump, then the cold and hot systems, checking every potential leak point for leaks.  Do this with the tank full and the pump on.

There has been a LOT of posting about how to spot a leak using toilet paper or paper towels.

When you find the leak, then you can figure out how to fix it.

Ken F in WY
'08 MB

Re: Water Leam
Reply #2
To add to what Kenneth said:

While a pipe itself can leak, the weak points are always where there is a fitting (an elbow, coupler, etc. rather than a straight pipe).

As others have said with any leak water can travel a ways inside roofs walls and flooring before it is visible so following the pipe lines is the best way to find the leak.

Jane

Sent from Yahoo Mail for iPhone
Jane & Scott
Currently have a 1989 TK  LD we did a lot of upgrades on.
Bigfoot 25RQ Twin on order with early summer 2024 ETA

Our smartphone autocorrects into very poor English.
 We disclaim the illusion of ignorance this creates as we have enough ignorance we rightly claim.

Re: Water Leam
Reply #3
Although a tank can develop a crack, more likely the leak is at the pump supply fitting at the tank, which should be accessible under some panel. If you have done any drilling in the vicinity of the tank, a hole in the tank could result. Has been known to happen to careless individuals...

Steve
2004 FL
2013 Honda Fit

Re: Water Leam
Reply #4
Although a tank can develop a crack, more likely the leak is at the pump supply fitting at the tank, which should be accessible under some panel. If you have done any drilling in the vicinity of the tank, a hole in the tank could result. Has been known to happen to careless individuals...

Steve

Fortunately no drilling.
LD 22', 1989 Custom Build. Chassis 1990 Chevy Van G30, 5.7l.

Re: Water Leam
Reply #5
Start at  your fresh water tank and work your way out via the pump, then the cold and hot systems, checking every potential leak point for leaks.  Do this with the tank full and the pump on.

There has been a LOT of posting about how to spot a leak using toilet paper or paper towels.

When you find the leak, then you can figure out how to fix it.

Ken F in WY
Always a process of elimination right?
LD 22', 1989 Custom Build. Chassis 1990 Chevy Van G30, 5.7l.