Log In | Register
Skip to main content
Topic: Need a new awning in Colorado (Read 254 times) previous topic - next topic
0 Members and 3 Guests are viewing this topic.
Need a new awning in Colorado
We're on the road and are in Colorado.
My '95TK needs a new awning. The original finally gave out. The roller gearing fell apart rendering it unfurled and inoperable.

Any recommendations for awning shops in Colorado?
2021 Mid Bath
 
Re: Need a new awning in Colorado
Reply #3 –
tedeboy-

It's not clear whether you need a new mechanism or just new fabric.

Our 1997 used a Fiamma awning. I broke a ratchet on one end. Fiamma was happy to send me a replacement at nominal cost (under $100, I seem to remember).

It might be less expensive to repair your awning. If not, then I would look for a label with part number, and try to replace it with a similar model.

I was impressed with how the Fiamma awning was built, and would prefer one on our current, non-LD coach- if it wouldn't cost $1,300 or so to replace!

Mark
Former owner, 1997-8 mid-bath
Former owner, 31-foot gas Class A
Former owner, 1997-8 mid-bath
Re: Need a new awning in Colorado
Reply #4 –
Call Tyler at tough top awnings and see if he can help.
Re: Need a new awning in Colorado
Reply #5 –
Quote from: l1v3fr33ord13  - 
tedeboy-

It's not clear whether you need a new mechanism or just new fabric.

Our 1997 used a Fiamma awning. I broke a ratchet on one end. Fiamma was happy to send me a replacement at nominal cost (under $100, I seem to remember).

It might be less expensive to repair your awning. If not, then I would look for a label with part number, and try to replace it with a similar model.

I was impressed with how the Fiamma awning was built, and would prefer one on our current, non-LD coach- if it wouldn't cost $1,300 or so to replace!

Mark
Former owner, 1997-8 mid-bath

It's an A&E awning.
Sadly it would not roll up anymore.
I disassembled it and into the trash.
When it broke it completely unrolled. It had issues and this was it's final goodbye.
All that is left is the housing and roller I couldn't take off with my tools onboard.
2021 Mid Bath