removing decals from rig August 25, 2017, 03:40:21 pm When we bought our RV from original owners they had put a circular decal on the back of the rig. I want that gone. Anyone had to deal with this? I don't want to use acetone fearing paint removal. There is another one on back bottom left hand corner of back window. I think I can remove that with water and scraping tool as long as I don't scratch window.
Re: removing decals from rig Reply #1 – August 25, 2017, 03:54:58 pm "I want that gone. Anyone had to deal with this?"I removed the 'LD' decal from the faux spare tire cover using a hair dryer (heat gun) and a plastic scraper. Take it slow, little bits at a time and the heat will soften the film. 2 Likes
Re: removing decals from rig Reply #2 – August 25, 2017, 04:02:51 pm Quote from: Lazy Bones - August 25, 2017, 03:54:58 pmI removed the 'LD' decal from the faux spare tire cover using a hair dryer (heat gun) and a plastic scraper.We had spots of tar on our LD decal and I was using a cleaner which messed up the decal. So I also used a hair dryer and slowly peeled the decal with my finger nail. It took a long time. Then I used a polishing compound and good wax and it looks fine ... actually looks a little naked. But the hair dryer is certainly a tool you could use. 1 Likes
Re: removing decals from rig Reply #3 – August 25, 2017, 06:35:14 pm Here some suggestions. How to Remove Bumper Stickers: 9 Steps (with Pictures) - wikiHowDon't forget they make plastic putty knives which might help.Jim 1 Likes
Re: removing decals from rig Reply #4 – August 25, 2017, 08:15:59 pm Hve you tried plastic razor blades? I've found them very handy for removing stickers of all kinds. 1 Likes As an Amazon Associate Lazy Daze Owners' Group earns from qualifying purchases.
Re: removing decals from rig Reply #5 – August 26, 2017, 09:31:50 am Thanks for the tip on hair dryer system since that is a staple in my house. And, I did not know there was a thing called plastic razor blades. Who knew Love learning new stuff. 1 Likes
Re: removing decals from rig Reply #6 – August 26, 2017, 03:03:27 pm OMG!!! Those decals came off in less than a minute with hair dryer and plastic razor blade. YIPPEEEE. Thanks for all your help. 3 Likes
Re: removing decals from rig Reply #7 – August 26, 2017, 03:10:55 pm Obviously you came to the right place for help! Remember us always. 3 Likes
Topic: removing decals from rig (Read 313 times)
previous topic - next topic
Topic: removing decals from rig (Read 313 times)
previous topic - next topic